The Basics of Assessment Validation: How to Validate Assessments
The Basics of Assessment Validation: How to Validate Assessments
Blog Article
Post-registration, RTOs are tasked with many responsibilities including annual declarations, AVETMISS reporting, and marketing compliance, and validation is often the most challenging.
Though we've written extensively on validation, let's clarify it again. ASQA describes it as a quality assessment review.
Put simply, validation checks which parts of an RTO's assessment process are accurate and spots areas for enhancement. A proper understanding of its main elements can make validation less daunting.
The 2015 SRTOs Clause 1.8 requires RTOs to make sure their assessment systems, including RPL, are compliant with training package requirements and conducted per the Principles of Assessment and Rules of Evidence.
As per the standards, two kinds of validation are required.
The first validation type ensures your RTO's assessments comply with the training package requirements in your scope.
The following validation type ensures that assessments follow the principles of assessment and rules of evidence.
This means we validate assessments both before and after they are conducted. This article will cover the first type—assessment tool validation.
The Fundamentals of the Two Types of Assessment Validation
Clarifying Assessment Validation
As we mentioned earlier and in our past blogs, validation consists of two parts: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, also called pre-assessment validation, pertains to ensuring all unit requirements are addressed, as outlined in the first part of the clause, ensuring total workbook compliance.
Conversely, post-assessment validation focuses on the implementation side, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.
In this article, we will emphasize assessment tool validation.
Steps for Conducting Assessment Tool Validation
With a clear understanding of the two types of validation, let’s focus on assessment tool validation.
Timing for Conducting Assessment Tool Validation
Assessment tool validation aims to verify that all elements, performance criteria, and performance and knowledge evidence are covered by your assessment tools.
This implies that any time new learning resources are obtained, assessment tool validation must be done before student use.
You don’t have to wait for the next scheduled validation in your 5-year cycle. Validate new resources right away to ensure they are ready for students.
Still, this isn't the only reason for this type of validation. Conduct assessment tool validation when you:
- updating your resources
- new training products get added on scope
- training product updates are reviewed against your course
- when learning resources are identified as a risk during your risk assessment
The Australian Skills Quality Authority employs a risk-based approach for regulating RTOs and expects regular risk assessments. Therefore, student complaints about learning resources are an ideal time to conduct assessment tool validation.
How to Choose Training Products for Validation
Keep in mind, this validation ensures that all learning resources comply before use. All RTOs must validate resources for each unit.
Getting Started with Assessment Tool Validation: Resources Needed
Training Materials
To validate assessment tools, you need the complete suite of your learning resources:
Mapping tool – begin with this document. It details which assessment items correspond to unit requirements, aiding faster validation.
Learner/student workbook – check its suitability as an assessment tool during validation. Ensure instructions are clear and answer fields are sufficient. This is a common issue.
Assessor guide/marking guide – verify that instructions for assessors are comprehensive and clear benchmarks for each assessment item are present. Clear benchmarks are key to reliable assessment outcomes.
Other related resources – may consist of checklists, registers, and templates created separately from the workbook and marking guide. Validate them to ensure they are appropriate for the assessment task and address unit requirements.
Panel of Validators
Clause 1.11 describes the requirements for validation panel members, indicating that validation can be performed by one or more persons. RTOs often require all trainers and assessors to attend, and sometimes industry experts are invited.
In total, your validation panel must have:
Vocational competencies and current industry skills applicable to the unit being validated
Current expertise and skills in vocational teaching and learning
One of the following training and assessment qualifications:
TAE40116 Certificate IV in Training and Assessment or an equivalent successor
Validation document/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool is advantageous for both the validation process and documentation. It aids in viewing how each assessment item matches each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
At the same time, it acts as documentation that you have validated your resources before allowing student use.
While ASQA does not recommend or require a specific template for assessment tool validation, numerous templates are available online. These tools generally require validators to examine the tools as a whole to see if they meet the principles of assessment.
Assessment Principles Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Though these templates simplify validation, they can lead to judgment errors due to limited space for comments on each assessment item.
It is advisable to use a more detailed template to inspect each unit requirement and its corresponding assessment items. Below is an example:
Element Performance Criteria Assessment Directions Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What to Check?
As highlighted in our blog post Common Problems In Assessment Tools, it is essential that your assessment tools enable trainers to adhere to assessment principles and evidence rules.
Fundamental Principles of Assessment
Fairness – Does the assessment provide equal opportunity and access to all participants?
Flexibility – Are different options provided in the assessment to demonstrate competence based on individual needs and preferences?
Validity – Does the assessment measure what it is supposed to measure? Is it a valid tool for evaluating the required skill or knowledge?
Reliability – Will the assessment yield the same results each time, no matter who conducts the training? Will different assessors make consistent decisions on skill competence?
Basic Rules of Evidence
Validity – Is the evidence proof that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there sufficient evidence to confirm the learner has the required skills and knowledge?
Authenticity – Is the assessment tool ensuring that the work is the candidate’s own?
Currency – Do the assessment tools reflect current units of competency and modern industry practices?
Even though these are often covered in VET professional development and nationally recognised training, many tools still struggle with these requirements.
To prevent employing learning resources that miss some unit requirements, be sure to follow these guidelines:
Act on Your Words
Pay attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:
Complete more info each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:
change nappies
bottle preparation, bottle-feeding infants, and cleaning equipment
prepare solid food and feed infants
respond suitably to infant signs and cues
prepare infants for sleep and settle them
monitor and encourage age-appropriate physical exploration and gross motor skills
Getting students to describe changing nappies for babies under 12 months doesn’t meet the unit requirement. Unless the requirement assesses underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.
Mind the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t enough.
Total or Not Competent
Mind the lists. Again, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Could You Be Clearer?
Every assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions do not confuse students or assessors. For example:
What kind of information can be included in a work package?
What type of information can be included in a work package?
Answers can include:
Needed resources
Applicable costs
Duration of activities
Appointed roles and responsibilities
If an assessment item demands multiple answers, specify how many answers a student must provide. This ensures your assessment is reliable, and the evidence gathered is valid.
This applies equally to assessment items with double-barrelled questions or questions that require more than one answer at the same time. These can confuse students and assessors, as illustrated in the example below:
Name a hazard and/or environmental issue in the work area and pick the most effective hazard control hierarchy.
Answers can include, but are not limited to:
Weather conditions – isolation of work area, engineering controls, personal protective equipment
Work area and ground conditions – eliminating hazards, isolation, use of engineering controls
People – isolation, engineering controls, administration
Structural hazards – substituting, isolation, use of engineering controls
Chemical hazards – isolation, use of engineering controls, administrative controls
Equipment or machinery – isolation, engineering controls, administration
Steering clear of double-barrelled questions makes it simpler for students to respond and for assessors to judge competence accurately.
Considering these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” However, with these guarantees, you must wait for an audit before they help rectify noncompliance. This affects your compliance history, so it's better to take a safe and compliant approach.